heapxj
 
Member #27
You Can Feel Good About Hood.
Posts: 1,082
|
Post by heapxj on Jan 7, 2008 22:37:02 GMT -5
What's this now? Did you ever get those axle seals done?
|
|
|
|
Post by Jeep Creep on Jan 7, 2008 22:38:27 GMT -5
hey will
check that pinion.
|
|
|
|
Post by HeavyMetal on Jan 7, 2008 22:39:17 GMT -5
What's this now? Did you ever get those axle seals done? yeah taken care of. im gonna assume this is a loose pinion nut right now |
|
heapxj
Member #27
You Can Feel Good About Hood.
Posts: 1,082
|
Post by heapxj on Jan 7, 2008 22:39:45 GMT -5
that can happen, sucks though because the carrier has to come out if you want a correct pinion preload setting again. Hopefully it's a u joint or something
|
|
|
|
Post by HeavyMetal on Jan 7, 2008 22:43:44 GMT -5
yeah thats what im hatin about this.... :/
|
|
|
|
Post by HeavyMetal on Jan 10, 2008 15:48:19 GMT -5
Should I have this much play in my pinion? its been a lonnng time since ive even tested for this so i cant recall. seems like quite a lot to me... also the pinion nut was not loose.  |
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jan 10, 2008 15:56:02 GMT -5
not good.
|
|
|
|
Post by Dr. Thunder on Jan 10, 2008 15:56:21 GMT -5
that is wwwwwwwaaaaaaaaayyyyyyyyyyyyyyy too much!!!!!! probably should take that cover off and check everything
|
|
|
|
Post by Dr. Thunder on Jan 10, 2008 16:02:38 GMT -5
i almost wonder if you chipped a tooth on the pinion. is it that sloppy throughout the entire rotation of the yoke?
|
|
|
|
Post by HeavyMetal on Jan 10, 2008 16:06:38 GMT -5
Well this is good news.  All i checked was that so far. i will have to pull the cover and check a bunch of other shit tomorrow. |
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jan 10, 2008 16:20:57 GMT -5
i almost wonder if you chipped a tooth on the pinion. is it that sloppy throughout the entire rotation of the yoke? i seriously doubt that. but i could be wrong. Seems like either the pinion preload wasnt set correctly in the first place or that the pinion nut wasnt torqued correctly thus working loose. |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 10, 2008 22:03:24 GMT -5
dude, i think its time for a 14 bolt, no more 44 bullshit
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jan 10, 2008 22:05:01 GMT -5
dude, i think its time for a dana60, no more 44 bullshit wait wait heres sam with useful info  |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 10, 2008 22:07:04 GMT -5
edited to be more useful
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jan 10, 2008 22:16:05 GMT -5
touche
|
|
