|
|
Post by 1tonflattie on Mar 17, 2008 23:41:49 GMT -5
|
|
|
|
Post by 1tonflattie on Mar 18, 2008 0:00:59 GMT -5
the red stuff is lucas "red and tacky" that i used to the needle bearings in the intermediate shaft during assembly. and some art... i painted my miller locker new miller blue   |
|
|
|
Post by Wide-J on Mar 18, 2008 8:48:08 GMT -5
cool mang!  |
|
|
|
Post by rckrdyxj on Mar 18, 2008 17:10:22 GMT -5
Wow, thats a redic t case. So you have two flat fender projects going at the same time. Sir you are  |
|
|
|
Post by rckrdyxj on Mar 18, 2008 17:12:39 GMT -5
for sure picked these up today, have been a long time coming, built by a local guy for a killer price.  Umm, ummm, What is it?  |
|
|
|
Post by 1tonflattie on Mar 18, 2008 17:17:46 GMT -5
for sure picked these up today, have been a long time coming, built by a local guy for a killer price. Umm, ummm, What is it? dana 60 high steer arms haha |
|
|
|
Post by rckrdyxj on Mar 18, 2008 17:18:42 GMT -5
Oooo's I c now.
|
|
|
|
Post by 1tonflattie on Mar 18, 2008 17:21:03 GMT -5
Wow, thats a redic t case. So you have two flat fender projects going at the same time. Sir you are yea i am ping ponging, it kinda sucks but i am at a point where arrival of parts dictates what i can do. The smaller jeep is way closer to being done |
|
|
|
Post by 1tonflattie on Mar 19, 2008 0:59:45 GMT -5
could not sleep. Just ordered all my clutch parts from centerforce (stage I/II disc, stage I PP, and throwout bearing) and an RCI aluminum fuel cell. Wanted to go with a stock clutch kit but there is no stock clutch kit that has a ford disc and chevy PP.
|
|
heapxj
 
Member #27
You Can Feel Good About Hood.
Posts: 1,082
|
Post by heapxj on Mar 19, 2008 15:48:00 GMT -5
I made my own hi steer arms as well. The steering is in the clouds now.
|
|
|
|
Post by 1tonflattie on Mar 19, 2008 18:24:59 GMT -5
yea a friend of mines buddy has a small machine shop in his basement but pretty advanced. we gave him a well known manufacturers high steer arms and he made a program jig and the tooling to make them. best part is he lives about 10 minutes away incase any alterations are needed!
|
|
|
|
Post by 1tonflattie on Mar 19, 2008 18:28:24 GMT -5
 heres the fuel cell I ordered... RCI 15 gallon 2 outlets, a return and tip over valve. And a chevy (0-90 ohm) sender. The one coming will probably go in my little flatfender but i plan on using this one in both of them |
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Mar 19, 2008 19:10:30 GMT -5
|
|
|
|
Post by 1tonflattie on Mar 24, 2008 23:17:57 GMT -5
ok heres everything cleaned up bolted together and clear coated... now all i have to do is build the twin stick shifters, probably tomorrow night.   |
|
|
|
Post by 1tonflattie on Mar 24, 2008 23:32:09 GMT -5
;D  all this came last friday! Centerforce 11" stage 1 chevy PP, Stage 1 Ford 11" cutch disc, Ford throwout bearing, and a Novak pilot bushing... Chevy crank, ford tranny. Not shown is a Jegs heavy duty chevy release arm, and Napa 11" Flywheel. All this is waiting on 6 flywheel bolts that I havent gotten yet! |
|
took me a second to figure out why you painted your diff case that color. that transfer case is dreamy. 
to every one of my posts.