|
|
Post by tmkeefe on Oct 31, 2008 8:03:47 GMT -5
just yank it off.... doesnt need to go back on! who needs to have doors?!  |
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Oct 31, 2008 9:36:05 GMT -5
you guys fail
i have about 1/2" of stud out, i could go less to make alignment even easier, but mah rockers push my doors up about 1/4"
just trim the studs short and use a dremel to make them into a point, doorless is friggin easy, and mine don't sag and they line up like shit, but thats because when i dent them in the middle they bow. it has nothing to do with this mod
|
|
|
|
Post by Dr. Thunder on Oct 31, 2008 10:23:54 GMT -5
you guys fail i have about 1/2" of stud out, i could go less to make alignment even easier, but mah rockers push my doors up about 1/4" just trim the studs short and use a dremel to make them into a point, doorless is friggin easy, and mine don't sag and they line up like shit, but thats because when i dent them in the middle they bow. it has nothing to do with this mod X2 on stud the cut short, thought that was common sense though. |
|
hydra
Breathing in a new mentality
Posts: 278
|
Post by hydra on Nov 4, 2008 20:43:36 GMT -5
|
|
Pedro
Watch out for that.... tree
Posts: 4,115
|
Post by Pedro on Nov 5, 2008 3:43:38 GMT -5
it is possible on 97+ XJ's. justin and rico did it
|
|
|
|
Post by OTTE on Nov 5, 2008 5:41:26 GMT -5
so whats the secret?  |
|
|
|
Post by Rev. AL on Nov 13, 2008 14:28:39 GMT -5
i really need to trim hinge pins and do my other door.  |
|
|
|
Post by xjeeper on Nov 13, 2008 19:08:33 GMT -5
drill/grind off the head of the pin and use a punch and hammer to knock the pin out. go to Home Guido and buy either a pin or bolt of about the right size and you are done.
|
|
