|
|
Post by Uncle Hawk on Jan 12, 2009 12:59:08 GMT -5
Anyone know off the top of their head a good ground source (without drilling into the body) in the driver leg space of a 94cherokee? I have a 1"x.5" connector to the right of my foot space with a 5-6 pin(flat males), that I don't know what it is. I do have a 12v constant there which I would like to tap my +pos from but I need a -neg ground as well and I'm not totally sure what that plug is so I don't want to be sending power back on something I could fry.
Ideas, chaps?
|
|
XJLI
 
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Jan 12, 2009 13:30:31 GMT -5
i have a big self tapping bolt right behind that lower kick panel like 6" from the fuse box i use for grounds for my switches.
|
|
|
|
Post by Uncle Hawk on Jan 12, 2009 13:42:23 GMT -5
You put it there or it's factory? Pic for me?
|
|
Rico
Member #31
Posts: 3,926
|
Post by Rico on Jan 12, 2009 13:42:35 GMT -5
i have a big self tapping bolt right behind that lower kick panel like 6" from the fuse box i use for grounds for my switches. Same here.... Dave u should find out what that connector is for |
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Jan 12, 2009 14:01:32 GMT -5
i put it there. i wouldnt tap power/ground from anything i didnt know what it was.
|
|
Riot
Driveway Baller
See you in the mosh pit...
Posts: 2,299
|
Post by Riot on Jan 12, 2009 14:05:28 GMT -5
Why not just drill?
I use a screw under muh backseat...
|
|
|
|
Post by Uncle Hawk on Jan 12, 2009 14:06:47 GMT -5
I'll trade a picture of my connector for a picture of your bolt
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Jan 12, 2009 14:09:51 GMT -5
its 15 degrees out = no wai
|
|
|
|
Post by Uncle Hawk on Jan 12, 2009 14:26:29 GMT -5
I just went out to take pics in PJ's and moccasins.. c'mon, you got more head coverage then I do.. AND no metal in your ears.. I bet your hair even COVERS your ears..
|
|
Riot
Driveway Baller
See you in the mosh pit...
Posts: 2,299
|
Post by Riot on Jan 12, 2009 14:28:01 GMT -5
Why dont you want to drill?
|
|
|
|
Post by Uncle Hawk on Jan 12, 2009 14:36:25 GMT -5
Just trying to avoid making changes I can't take back, I had enough holes in the old jeep, making it very cold inside even with the heat on. Of course my old sony cam is not compatible with vista-64... looove it.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Jan 12, 2009 15:03:05 GMT -5
theres nothing your drilling that will make it colder... you put a self tapper in metal that doesnt even see the outside of the jeep, and theres a plastic kick panel over it.
|
|
Riot
Driveway Baller
See you in the mosh pit...
Posts: 2,299
|
Post by Riot on Jan 12, 2009 15:24:56 GMT -5
What are you grounding anyways? Mine is for my amp.
|
|
Adam
Member #36
Posts: 1,528
|
Post by Adam on Jan 12, 2009 15:28:44 GMT -5
My grounds go through the rubber grommet above your left foot, near the kick panel. Then into the engine bay. I ground some paint off a small hole that was already there.
|
|
|
|
Post by Uncle Hawk on Jan 12, 2009 23:01:43 GMT -5
  what's it? |
|
