|
|
Post by HeavyMetal on Oct 11, 2008 13:53:45 GMT -5
I am looking to put rocklights back in my rig..i need them to be water-sealed against the elements, and to project a good enough "beam" as to illuminate the ground in front of/around my tires. i did this with limited success 2 years ago with cheap ass walmart lights (non LED) and they worked for a couple trips until they succumbed to water destruction/failure.... I know there are cheap LED options out there for sealed units that will project light, i just dont rmeember where and im not sure where to start...thanks all  |
|
crosbike
 
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Oct 11, 2008 14:51:21 GMT -5
noisy pic.
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Oct 11, 2008 15:31:53 GMT -5
Just wheel during the day Lestat.
|
|
|
|
Post by HeavyMetal on Oct 11, 2008 16:06:32 GMT -5
thanks guys
|
|
Pedro
Watch out for that.... tree
Posts: 4,115
|
Post by Pedro on Oct 11, 2008 16:14:58 GMT -5
i would say try to find a truck and trailor supply place. they have hundreds of all sorts of LED's that go on big rigs and stuff. im sure you can find something there
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Oct 11, 2008 16:40:24 GMT -5
Will what about those LED reverse lights for the trailers? Like the ones I used for my metal tail lights. Those are sealed and seem to put off some good light.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 11, 2008 22:24:43 GMT -5
oznium.com
|
|
|
|
Post by HeavyMetal on Oct 11, 2008 22:33:51 GMT -5
|
|
|
|
Post by Burton58 on Oct 12, 2008 11:12:38 GMT -5
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Oct 12, 2008 11:46:52 GMT -5
eww. flex strips
|
|
|
|
Post by Burton58 on Oct 12, 2008 11:52:51 GMT -5
|
|
Speed
FAIL SPECIALIST
Snappin Shafts? Yeah Right...
Posts: 1,811
|
Post by Speed on Oct 12, 2008 13:03:12 GMT -5
I would think about taking the few hours out and sealing anything you get with RTV. do what i do and get a tube of silicon sealer (same shit) and a chalk gun. seal any cracks/gaps with the stuff and it will make them last longer.
|
|
Speed
FAIL SPECIALIST
Snappin Shafts? Yeah Right...
Posts: 1,811
|
Post by Speed on Oct 12, 2008 13:05:12 GMT -5
^just took a look at those marine lights. then the rtv may not be necessary.
|
|
|
|
Post by HeavyMetal on Oct 12, 2008 16:53:32 GMT -5
yeah the ones i posted are actually mean to be used underwater haha, so i think they should be sealed all giggity-like
|
|
Speed
FAIL SPECIALIST
Snappin Shafts? Yeah Right...
Posts: 1,811
|
Post by Speed on Oct 12, 2008 16:58:08 GMT -5
well, I jumped the gun, alright?
jerk.
|
|
to every one of my posts.
