|
|
Post by j33p0104 on Sept 13, 2008 11:19:48 GMT -5
does anyone know how to unbolt the lower bolt connected to the axel on the track bar? it has like a metal shield around the whole thing so i cant get a wrench in there.
|
|
|
|
Post by craptastic on Sept 13, 2008 11:23:32 GMT -5
the inner nut is suppoased to have a wing on it so you dont have to use a wrench. mine snape'd off before and it is a pain in the ass. what ended up working for me was have one person ram a screwwdiver between the nut and mount and keep tension on it while another loosens from the front. it will slip on ya a couple time but it worked for me. another option might be to use angle needle noser visegrips
|
|
|
|
Post by Uncle Hawk on Sept 13, 2008 12:02:19 GMT -5
just use a grinder and cut open the port-hole larger.. that what i did
|
|
|
|
Post by j33p0104 on Sept 13, 2008 12:30:18 GMT -5
will it weaken anything? i tried putting a screwdriver in and it kept slipping out.
|
|
|
|
Post by Dr. Thunder on Sept 13, 2008 13:53:56 GMT -5
You should be able to fit a wrench in there from my past experiences
|
|
|
|
Post by j33p0104 on Sept 13, 2008 17:13:51 GMT -5
i cut it alittle and it worked good
|
|
|
|
Post by j33p0104 on Sept 14, 2008 10:19:58 GMT -5
is the tie rod on it reverse thread and the bolt securing the tie rod?
|
|
