|
|
Post by jeepbonehead on Sept 6, 2008 13:30:04 GMT -5
OK so i put on the 33" and i got the wobble. i think it might need an alignment, but i don;t know could anyone going to rausch creek next weekend that knows what to look for help me out? I'm most likely going and i'm still learning the lifted jeep ways
|
|
Speed
 
FAIL SPECIALIST
Snappin Shafts? Yeah Right...
Posts: 1,811
|
Post by Speed on Sept 6, 2008 14:15:29 GMT -5
I havent had death wobble in quite some time, so i may be wrong about this, but check the following:
Are your tires balanced?
use a tape measure and measure from the inside to inside of the front and back of the front tires. this will give you an idea of the alignment. if the two numbers are way off, you need an alignment.
make sure your track bar isnt loose.
and what the hell, check your tire pressure.
see if any of that helps.
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Sept 6, 2008 14:32:19 GMT -5
so is it the fact you fabricated Death Wobble that it belongs in the Fab forum?
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Sept 6, 2008 15:14:34 GMT -5
so is it the fact you fabricated Death Wobble that it belongs in the Fab forum?  and theres a deathwobble sticky in the tech thread. |
|
|
|
Post by netrachamp1853 on Sept 13, 2008 21:48:33 GMT -5
If its not to late if your steering stabilizer is old replace it, even with an oem one from autozone or something that cured my death wobble real quick.
|
|
