|
|
Post by CumminsJeep on Sept 5, 2008 23:18:46 GMT -5
i need a tool list for front dana 30 axle shafts. i know how to take them out, i just need to make sure i have all the tools so i can get alex's shafts on friday before rausch. i need socket sizes if at all possible. i have most. not too many big ones tho.
|
|
XJLI
 
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Sept 5, 2008 23:22:11 GMT -5
just shafts? youll need:
14mm 12 pt socket (hubs), 15mm socket (calipers), lug wrench (duh), BFH, prybar, needle nose pliers, 36mm socket and big ass breaker bar.
|
|
|
|
Post by CumminsJeep on Sept 5, 2008 23:26:28 GMT -5
i really just need the nut on the end of the shaft, which im taking a wild guess (not really) and saying its the 36mm. guess im gonna go buy one. cool beans. thanks adam.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Sept 5, 2008 23:42:13 GMT -5
i may, or may not be correct about the 14 and 15mm as to which is 12pt. check on either jeep, theyre all the same.
|
|
|
|
Post by JustTorchIT on Sept 6, 2008 0:02:14 GMT -5
i may, or may not be correct about the 14 and 15mm as to which is 12pt. check on either jeep, theyre all the same. every d30 i ever done is 13mm 12 point for the hub  |
|
|
|
Post by Wide-J on Sept 6, 2008 0:03:10 GMT -5
I believe they are 13mm 12 point.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Sept 6, 2008 0:06:31 GMT -5
hokay, so its 13mm for the hub, and 14mm for the caliper. i just remembered the caliper bolts being one size up. |
|
|
|
Post by JustTorchIT on Sept 6, 2008 0:09:44 GMT -5
hokay, so its 13mm for the hub, and 14mm for the caliper. i just remembered the caliper bolts being one size up. now wat if i say my caliper bolts are 13?  .... lol... you must have one of them "SPECIAL" jeeps..... or maybe i just have a "GIFTED" jeep |
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Sept 6, 2008 0:13:45 GMT -5
hokay, so its 13mm for the hub, and 14mm for the caliper. i just remembered the caliper bolts being one size up. now wat if i say my caliper bolts are 13? .... lol... you must have one of them "SPECIAL" jeeps..... or maybe i just have a "GIFTED" jeep jeeps are retarded /thread. either that or my sockets are mislabeled. dont rule that out  |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Sept 6, 2008 12:49:46 GMT -5
ive seen a few different caliper bolt sizes, but whatever it is you should have in your toolbox anyway.
|
|
.... lol... 