|
|
Dana 44
Aug 18, 2008 17:57:11 GMT -5
Post by greenxj513 on Aug 18, 2008 17:57:11 GMT -5
preferabley a bolt on from an earlier model xj. i kno theyre hard to find but i want to get one asap. also preferabley 3.54 stock gears so i can put it on as i right now dont have the money for the 4.56 and the lockers. need to start somewhere though.
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Dana 44
Aug 18, 2008 20:32:20 GMT -5
Post by KtmRacer419 on Aug 18, 2008 20:32:20 GMT -5
i have one out of a j-10
spring perches set up for xj
33 spline moser alloys
6 lug
add your own gears
add your own locker
add your own brakes
add your own cover
add your own shock mounts
|
|
|
|
Dana 44
Aug 18, 2008 20:41:26 GMT -5
Post by Uncle Hawk on Aug 18, 2008 20:41:26 GMT -5
sam what's up with the mosers? can I make those work in mine?
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Dana 44
Aug 18, 2008 21:00:46 GMT -5
Post by KtmRacer419 on Aug 18, 2008 21:00:46 GMT -5
go find a 33 spline 8.8 locker, eliminate your c-clips and find a bearing that's 1.592" inner diameter and the 8.8 housing end outer diameter then trim the shafts to fit
i don't think they make a 33 spline 8.8.
i would say your best shot at making them work is trying to find out if you can get 33 spline detroit spiders in a 8.8 detroit.
seems like more of a headache than its worth
|
|
|
|
Dana 44
Aug 18, 2008 23:18:20 GMT -5
Post by Uncle Hawk on Aug 18, 2008 23:18:20 GMT -5
ohhhhhhhhhhhhh rear... i'm thinking front, sam, sorry.
|
|
|
|
Dana 44
Aug 19, 2008 9:51:17 GMT -5
Post by greenxj513 on Aug 19, 2008 9:51:17 GMT -5
not gonna lie sounds like way too much work.
ideally i want to find one i can bolt on now with stock gears and then when i have enough money saved, re-gear, lock and what not.
if i feel like taking on the project though, i'll hit you up.
|
|
|
|
Dana 44
Aug 21, 2008 20:54:37 GMT -5
Post by olred96 on Aug 21, 2008 20:54:37 GMT -5
i got a 44 not bolt in though its out of a 79 f150 it has 3.55 no vacuum disconnect
|
|
|
|
Dana 44
Aug 21, 2008 23:48:09 GMT -5
Post by greenxj513 on Aug 21, 2008 23:48:09 GMT -5
i dont mind doing small mods, like shock mounts and spring perches so im actually really into tht.
the only thought i have though is will it be too wide for my xj??
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Dana 44
Aug 22, 2008 8:46:11 GMT -5
Post by KtmRacer419 on Aug 22, 2008 8:46:11 GMT -5
the dana44 hes talking about is a front
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Dana 44
Aug 22, 2008 8:47:38 GMT -5
Post by XJLI on Aug 22, 2008 8:47:38 GMT -5
seems he wants an XJ 44.
|
|
|
|
Dana 44
Aug 22, 2008 13:50:30 GMT -5
Post by greenxj513 on Aug 22, 2008 13:50:30 GMT -5
yea preferably. and when it comes to where to find them and what models out of what trucks will work im basically lost. i can do all the work to them thts gonna be required but when it comes to finding one that will work i'm trying my best to just stick to finding one out of an older xj.
|
|
