Rico
 
Member #31
Posts: 3,926
|
Post by Rico on Apr 18, 2008 6:40:39 GMT -5
I like this philosophy
|
|
|
|
Post by xjeeper on Jul 25, 2008 18:50:31 GMT -5
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Jul 25, 2008 23:02:05 GMT -5
coolness. how tough is that currie stuff? i know its stronger than stock, but if stock is 1 and banditt is 10.... go.
|
|
Pedro
Watch out for that.... tree
Posts: 4,115
|
Post by Pedro on Jul 25, 2008 23:37:52 GMT -5
i like the keep the 31 cuz it wont break as much philosophy. i think i will follow it
|
|
|
|
Post by xjeeper on Jul 26, 2008 10:25:15 GMT -5
coolness. how tough is that currie stuff? i know its stronger than stock, but if stock is 1 and banditt is 10.... go. id have to say like 6 or 7 because the tie rod and drag link are solid steel 1 1/4" and the ends are much beefier than stock except the taper remains the same. they claim to be 200% stronger than stock and it is quite heavy so we shall see. going to do the install with some pics ill be back later |
|
|
|
Post by Dr. Thunder on Jul 26, 2008 10:45:21 GMT -5
I'd say more in the 5 range, I looked at it this setup before him and talked to the guy, he said he still bent/broke the tie rod when he hit rocks hard.
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jul 26, 2008 11:17:40 GMT -5
steve bent a tie rod pretty good on his banditt steering soooooo
|
|
|
|
Post by xjeeper on Jul 26, 2008 13:44:17 GMT -5
shouldnt this actually be stronger then banditt at 1 1/4" solid instead of 1 1/2" with .25" wall? both setups use 7/8" ends except mine are built for stock taper. the only weak point of mine compared to banditt that i see would be the ends.  |
|
|
|
Post by xjeeper on Jul 26, 2008 14:22:25 GMT -5
|
|
|
|
Post by Burton58 on Jul 26, 2008 14:45:57 GMT -5
why is your camber so messed up? |
|
|
|
Post by JustTorchIT on Jul 26, 2008 14:52:11 GMT -5
hubs or ball joints???
|
|
|
|
Post by xjeeper on Jul 26, 2008 17:46:14 GMT -5
both the hubs and the ball joints are like 3 months old but i wish i got the adjustable ball joints so i could adjust camber
|
|
blakdot
Forum User
blak meets wite
Posts: 234
|
Post by blakdot on Jul 26, 2008 17:52:38 GMT -5
hey look its my hi-lift handle  |
|
|
|
Post by Burton58 on Jul 26, 2008 18:46:33 GMT -5
so if the hubs and balljoints are new why is it doing that? did you bend your D30 housing??
|
|
|
|
Post by xjeeper on Jul 26, 2008 22:02:11 GMT -5
so if the hubs and balljoints are new why is it doing that? did you bend your D30 housing?? who knows, im probably crazy enough to do that without realizing it |
|
to every one of my posts.
