|
|
Post by rckrdyxj on Feb 3, 2008 1:24:08 GMT -5
Ok, i can get all the bearings i need for setup for under $25 and ia m finally ordering the carrier, and gears and bearings for the d 30 this week.
|
|
|
|
Post by Dr. Thunder on Feb 3, 2008 11:55:24 GMT -5
you will need a dial indicator with a base or something. the easiest way to setup diffs is to have another set of bearings withe the inside ground down just enough so you can slide the bearings on and off to set your depths.
|
|
|
|
Post by rckrdyxj on Feb 3, 2008 15:00:53 GMT -5
I am borrowing a dial indicator, and i am getting another set of bearing to do the setup.
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Feb 3, 2008 15:45:49 GMT -5
inch lb beam type torque wrench is what you need
or dial
something that will measure from about 0-40 in/lbs accurately
|
|
|
|
Post by rckrdyxj on Feb 3, 2008 19:39:29 GMT -5
Yea i just found out you cant use teh clicking style in lb torque bar.
|
|
|
|
Post by rckrdyxj on Feb 10, 2008 15:27:23 GMT -5
Gears are on hold again due to bills and lack of $$$$$.  Will not be locked or geared for mabelle but deffinitly done before my first RC trip. Things left to do: Buy gears, carrier, locker and bearing kit for D30, Set gears and install D44 and set gears in D 30, Buy SYE w/ front shaft (have shaft) Get some type of T case skid, (prolly rustys till i can afford TNT y link.) Complete list before RC this spring/summer. |
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Feb 10, 2008 16:30:42 GMT -5
that sucks man. u should sell a kidney or sumfin.
|
|
|
|
Post by rckrdyxj on Feb 10, 2008 16:49:13 GMT -5
trust me i want to, So it looks like one more open/open 3:55's on 35's mabelle trip.
|
|
|
|
Post by rckrdyxj on Mar 24, 2008 21:35:19 GMT -5
The date is set. The weekend of the 12th of april i will be at steves house to do gear my axles and install the d 44.
I was bored today so i put the D 30 riddler diff cover on. Full of WIN.
|
|
|
|
Post by Bigbike on Mar 24, 2008 21:38:01 GMT -5
 Sweet thats awesome Kyle.
|
|
|
|
Post by Mr. Jeeperz on Mar 24, 2008 22:15:02 GMT -5
riddler |
|
|
|
Post by Wide-J on Mar 24, 2008 23:02:54 GMT -5
The date is set. The weekend of the 24th f april i will be at steves house to do gear my axles and install the d 44. EDIT: We are planning for April 12th now. |
|
|
|
Post by rckrdyxj on Mar 25, 2008 12:32:11 GMT -5
Yes the 12th now, i cant wait its been long time coming and well over due, the next on the list is an sye and the bejjing front end conversion.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Mar 25, 2008 13:59:31 GMT -5
shotty your front end when you do that china jeep junk  |
|
|
|
Post by rckrdyxj on Mar 26, 2008 16:30:54 GMT -5
Oh i will makes many a pics of that.
I will be putting on my new T case skid monday that will be painted the same green as my diff covers, and i will hopefully be doorless as of monday as well.
|
|
to every one of my posts.
