|
|
Post by Dr. Thunder on Jan 9, 2008 21:10:24 GMT -5
where are you putting the long arm mounts???
|
|
CSaddict
 
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Jan 9, 2008 22:16:31 GMT -5
Inboard of the "frame" rails.
|
|
|
|
Post by HeavyMetal on Jan 9, 2008 22:18:22 GMT -5
tntntntntntntntntntnt
|
|
|
|
Post by Dr. Thunder on Jan 9, 2008 22:18:57 GMT -5
sweet, 1 or 2 upper links (assuming y-links).
|
|
|
|
Post by Dr. Thunder on Jan 9, 2008 22:20:08 GMT -5
oh by the way when i got my suspension articulating and squished one tire all the way up i still had an inch to 1 1/2 inches to the frame rail so its pretty fool proof  |
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Jan 9, 2008 22:27:04 GMT -5
Cool. I'm hoping there will be rubbing. Im bump stopped anyway so it should be fine. And yes, Y link FTW.
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Jan 9, 2008 22:28:36 GMT -5
Cool. I'm hoping there will be rubbing. Im bump stopped anyway so it should be fine. And yes, Y link FTW. typo or am i retarded? u want rubbing? |
|
|
|
Post by Dr. Thunder on Jan 9, 2008 22:29:34 GMT -5
you gonna bend the control arms like tnt did?
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Jan 9, 2008 22:38:52 GMT -5
Yeah typo. Hopefully no rubbing. I'm not going to bend them. They should be fine. I will remove the springs and compress it and check. sorry I just saw, 2 upper links. I don't like the idea of 1. Redundant safety works for me.
|
|
|
|
Post by Dr. Thunder on Jan 9, 2008 22:45:05 GMT -5
agreed, i like the looks of box tubing better than tube
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Jan 9, 2008 22:49:03 GMT -5
I was going to do 1.75x.250 wall DOM but I got the square for 3.50 a foot!
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 9, 2008 23:30:43 GMT -5
fail bends
|
|
CSaddict
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Jan 10, 2008 6:50:01 GMT -5
What are you trying to say? I have a hard time understanding your SIS L33t speak. |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 10, 2008 13:08:17 GMT -5
i just dont like the idea of bent links, sure they dont touch rocks as often, but they let the front driveshaft be the first thing in that area to touch rocks.
|
|
|
|
Post by HeavyMetal on Jan 10, 2008 13:36:15 GMT -5
yeah if you build a LP axle.  My HP30 w/TNT  LP44 w/TNT  its still out of the way with the susp articulating  ive ridden the arms over rocks a few times now and have yet to have a driveshaft contact anything. the rear on the other hand.... |
|
to every one of my posts.