|
|
Post by JustTorchIT on Jul 5, 2008 14:29:04 GMT -5
throw some frame stiffeners on, then cut the floor where needed to run some supports from the box tube to the stiffeners..... also could make some nice cage tie ins off that..
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jul 5, 2008 15:06:21 GMT -5
i prefer weld to throwing
|
|
|
|
Post by rckrdyxj on Jul 5, 2008 16:25:57 GMT -5
It looks good.
Jeepernick is a Faggot. hes always got some useless input on anything thats never what you want to hear.
As far as the rockers go I dont remember how bad the under side pinch weld area is but what you could do it solidly weld them in the jamb area as much as you can, fill in with sheet metal the holes rear the rear door areas and under you could use some braces of square tubing to brace from the box tubing to the unibody like a normal rock slider (similar to what timmay on Jeepin did)and fill in any open holes with more sheet metal.
|
|
Rico
Member #31
Posts: 3,926
|
Post by Rico on Jul 7, 2008 7:10:10 GMT -5
post link to jeepforum, as i do not like to search
|
|
|
|
Post by HeavyMetal on Jul 15, 2008 11:33:31 GMT -5
whenever i decide exactly how i wanna attach it..looks like its gonna look good   |
|
|
|
Post by Burton58 on Jul 15, 2008 11:35:01 GMT -5
just do it fold down. it'll be easier and you'll have a seat for on the trail
|
|
|
|
Post by Jeep Creep on Jul 15, 2008 11:35:16 GMT -5
that looks perfect
|
|
Bucket-O-Karma
Pirate in need of a bigger ship![F4:bucketokarma]
Posts: 2,072
|
Post by Bucket-O-Karma on Jul 15, 2008 11:36:04 GMT -5
Not bad, I would try to make it attach in a similar manner as it did to the pick-up bed, so you can remove it whenever you desire.
|
|
|
|
Post by Bigbike on Jul 15, 2008 11:37:52 GMT -5
I agree on having it be fold down like a pickup trucks. It does look really good. Are you going to paint it to match?
|
|
|
|
Post by HeavyMetal on Jul 15, 2008 11:42:59 GMT -5
yes i want it to fold down...prety much set in stone. figuring out attachment points and making it strong is the step that needs thought. and yeah its gonna be painted..i just took it out of my jeep and sat it on there for the pics now
|
|
|
|
Post by 4lowdigital on Jul 15, 2008 14:10:07 GMT -5
looks  sweet like that... almost like it was MADE to go there! |
|
|
|
Post by Dr. Thunder on Jul 15, 2008 15:54:46 GMT -5
So how long does it take to take a tailgate off???
|
|
|
|
Post by HeavyMetal on Jul 15, 2008 16:03:01 GMT -5
So how long does it take to take a tailgate off??? COLOSSAL SMITE |
|
Pedro
Watch out for that.... tree
Posts: 4,115
|
Post by Pedro on Jul 15, 2008 19:24:51 GMT -5
|
|
|
|
Post by Dr. Thunder on Jul 15, 2008 20:40:18 GMT -5
On a more serious not that looks awesome  That will be quite a little project in itself to make latch and work properly. |
|
