Mike
 
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Apr 30, 2007 22:41:52 GMT -5
Need one. For an xj
|
|
|
|
Post by Jeep Creep on May 1, 2007 18:35:55 GMT -5
make one out of your stock one
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on May 1, 2007 20:49:46 GMT -5
how
|
|
|
|
Post by Jeep Creep on May 1, 2007 20:53:54 GMT -5
do you have a spare drag link?
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on May 1, 2007 20:54:57 GMT -5
yea
|
|
|
|
Post by Jeep Creep on May 1, 2007 21:00:42 GMT -5
you cut the adjuster out and then cut ur trac bar and weld the adjuster in. its not the best but it will get you by for a while, i did it
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on May 1, 2007 21:01:18 GMT -5
got any pics?
|
|
|
|
Post by Jeep Creep on May 1, 2007 21:03:03 GMT -5
nah but i can get some on tomorrow
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on May 1, 2007 21:12:59 GMT -5
|
|
|
|
Post by Jeep Creep on May 2, 2007 13:46:26 GMT -5
|
|
|
|
Post by Jeep Creep on May 2, 2007 13:51:18 GMT -5
its hard to tell that i did it because it was grinded smooth and then painted, but it works good, just loosen the bolt and then turn it to adjust. im going to modify the upper mount soon to look like this  |
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on May 2, 2007 20:33:48 GMT -5
is there a writeup on naxja or anything like this?
|
|
|
|
Post by Jeep Creep on May 3, 2007 11:11:33 GMT -5
no there isn't, i came up with the idea myself
its really not that hard. you have to cut out a piece of your trac bar the same length on the adjuster you cut out of the drag link. if you have a cutting tool and know how to weld, you can do it no problem. but you might want a spare stock trac bar juuuuuust in case you screw up
|
|
