my axles and suspension. 44 front, 60 rear,

[KtmRacer419]

many of yall know what they are but now i wanna sell em'

bolt into xj as long as you can weld 2 little brackets onto your framerails.

suspension: custom radius arm/longarm,

both axles are about 63.5" wms-wms and 6 on 5.5" lug pattern.

both use 1310 u-joint yokes.

front axle specs, low pinion dana44, 5.38 yukon gears, detroit locker, 30 spline moser alloy shafts(inner and outer, spicer 760-x u-joints, warn premium locking hubs, rock crusher diff cover, custom bracketry. over the knuckle steering. setup so no link mounts are under the axle and a 2" wheelbase stretch. spare stock shafts as well.


rear axle specs, low pinion dana60, 5.38 yukon gears. 35 spline strange engineering spool. 35 spline alloy shafts, needs axle seals and one retainer plate.

rear axle has about 1500 miles on it

front axle has about 10,000 miles on it.

gonna ask $2600 for the package, i dont want to separate, and no intense lowballing please.

[KtmRacer419]

[Dr. Thunder]

do you still have the ox for the old 44 rear?

[CSaddict]

Whats the bottom line Sam?

[KtmRacer419]

drthunder032000 said:

do you still have the ox for the old 44 rear?

your over a month too late. sold it for the measely sum of $250

[KtmRacer419]

csaddict said:

Whats the bottom line Sam?

idontfawkingknow.

i am in no rush to sell them, so the price is gonna be fairly firm for a long while

[Mr. Jeeperz]

then why buy 2 jeeps in the last couple weeks?

[KtmRacer419]

what does that have to do with anything?

[Mr. Jeeperz]

[Dr. Thunder]

ktmracer419 said:

drthunder032000 said:

do you still have the ox for the old 44 rear?

your over a month too late. sold it for the measely sum of $250

dude you suck! i would have paid much more for it. FUCK!

[KtmRacer419]

i made about a million for sale ads in naxja,jeepforum and here and bumped them once every couple days.

i dont know what your planning on for axles, but if you go 6 lug and want a 33 spline locker ill sell you my old shafts for cheap, they just need to be narrowed if you want to use them in a narrower rearend. they use stock xj bearings

[KtmRacer419]

bump

i will consider parting them out if there is enough interest.