|
|
Post by 1tonflattie on Nov 14, 2007 23:59:49 GMT -5
Reverse Cut gears, fit high pinion axles only
barely used
$100 obo
|
|
kracker
Forum User
asphincter says what.....
Posts: 236
|
Post by kracker on Nov 17, 2007 21:14:48 GMT -5
how do you know if anaxle is high pinion? im asking cause im a fucking newb to the axle /gear/locker/....i have d44's off an 88 gw if that helps are they compatible?
|
|
|
|
Post by Wide-J on Nov 17, 2007 21:16:34 GMT -5
Bill, you have low pinion axles, sorry. You can tell the difference by looking at the yoke. If it is higher than the axle tube, its high pinion. Lower than the tube its low pinion.
|
|
kracker
Forum User
asphincter says what.....
Posts: 236
|
Post by kracker on Nov 18, 2007 19:19:07 GMT -5
oooooooooohhhhhhhhhhhhhh........o.k.
|
|
|
|
Post by 1tonflattie on Nov 20, 2007 22:41:09 GMT -5
yea they wont work... thanks for the reply tho
|
|
|
|
Post by NMetal13j on Nov 29, 2007 23:05:46 GMT -5
fit a 94" yj?
|
|
|
|
Post by 1tonflattie on Nov 30, 2007 7:08:38 GMT -5
no, unless the yj has a high pinion d44 swapped in
|
|
