|
Post by spanky on Dec 7, 2006 17:15:01 GMT -5
've got an hp d44 and a ford 9" out of a 77 f-150. the front has new ball joints and u joints. only 1 trip on em. the front is set up for spring over and spring under (i switch setups constantly trying to decide which i liked better). it has a set up warn premium hubs on it, and there is a spare set to go with it. i also have a knuckle set for high steer for the passenger side that will go with the axles from CODE4x4 (waggy knuckle machined with chevy brakes and a highsteer arm installed) the axle currently has the ford knuckle installed, as i didn't need the high steer with my current suspension setup. the rear is a ford 9" with the stock drum setup. it has spring under and 4 link mounts on it. the rear axle has a spool, the front is welded up. they have 4.10 gears. the gears probably have a couple of thousand miles on em at the most. i've run these axles on my YJ for about 3 years now. i've never had a problem with em. they've held up to my 36" Iroks without a problem. i bought a set of 60's as i plan on stepping up to a set of 39 Iroks now, so i don't need these axles anymore. i'm asking $800 for the set. if interested pm/email/call me. (its some dude on jeepsunlimited) www.jeepsunlimited.com/forums/showthread.php?t=781011
|
|
|
Post by Kobra Kommander on Dec 11, 2006 21:31:30 GMT -5
good deal?
i have a yj with stock 4,10 axles and gears
this would be any easy upgrade becasue the brakets are all there??
|
|
|
Post by Kobra Kommander on Dec 19, 2006 19:18:48 GMT -5
well i should have asked if i could get his email....i cant get on the site...
|
|
|
Post by spanky on Dec 19, 2006 22:14:42 GMT -5
as easy as any axles sway but there strong axles and can be made very strong for pretty damn cheap
|
|
|
Post by Kobra Kommander on Jan 6, 2007 10:01:58 GMT -5
what i should asked was, can i bolt them onto a YJ or do i need to have them welded for new perches.... i am SUA
|
|
|
Post by spanky on Jan 6, 2007 11:10:57 GMT -5
its set up for a bronco ull need to cut off the old perches and weld new ones on
|
|
YeaItsCold
Member #19
Every beast, every man pays her price.
Posts: 3,974
|
Post by YeaItsCold on Jan 6, 2007 15:38:17 GMT -5
They full size?
|
|
|
Post by Kobra Kommander on Jan 8, 2007 2:33:05 GMT -5
who does that stuff? i am still too poor to afford a nice welder yet....so i would have to get someone to fab that up for me....and then re-gear to 4.88's
|
|
|
Post by jeepgirl13 on Jan 8, 2007 10:06:40 GMT -5
who does that stuff? i am still too poor to afford a nice welder yet....so i would have to get someone to fab that up for me....and then re-gear to 4.88's You find someone who can help you. You can do it yourself. How do you think I learned.
|
|
|
Post by Kobra Kommander on Jan 9, 2007 0:16:37 GMT -5
i dont have a welder.....
|
|