CSaddict
 
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on Dec 16, 2007 12:23:31 GMT -5
The only thing you might regret is making the out riggers mount to the bottom of the slider not flush on the back. they might get hung up on sumtin. but the mor ei look at it those are pretty close to the ends wher eyou prolly wont hit anything. |
|
|
|
Post by rckrdyxj on Dec 16, 2007 14:27:56 GMT -5
Hooke don Phonics did not work for me, i cant read.  |
|
kracker
Forum User
asphincter says what.....
Posts: 236
|
Post by kracker on Dec 20, 2007 19:29:00 GMT -5
where did you get the stock? logan steel? how much? BTW they look pretty sweet! how much for you to make me a set if i get the material? |
|
|
|
Post by Dr. Thunder on Dec 20, 2007 20:13:26 GMT -5
i would need you're jeep for the day(about 6-8 hours) oh and i'm assuming it's a cherokee not a comanche, for it to be worth it to me it would be about 150.
I got my steel from plainfield scrap up the road. the angle i used was 3x3 .25 inch thick and it cost about 12 bucks plus (used stuff) i needed the 2x2 box (about 4ft and beefy) and some 3 or 4 inch 3/16 or so plate for the frame mounts(about a 1.5 ft.) so 1" flat stock pretty beefy and some grade eight bolts. not sure if it would be worth it for you. they really aren't all that hard to make if you have access to a saw, drill, and a welder
|
|
kracker
Forum User
asphincter says what.....
Posts: 236
|
Post by kracker on Dec 20, 2007 20:40:23 GMT -5
actually i have a YJ, but my problem is im not really that knowledgeable with welding,but i'd love to try it!
|
|
