Need XJ slider plans

[rckrdyxj]

I will be building a set of rock sliders in my welding class in a few weeks nad i need a complete set of detailes plans on how to build and attach a set of 3/16th rock sliders. preferably aj's rock sliders type including pinch weld attachments, square sub structure with round outer tubes etc. any input or plans welcome.

[heapxj]

I'll measure mine in a day or so I when I can get the Jeep back in the garage. I have JCR stage 2s. In a couple weeks, I'll give you details on how to cut out your rockers and boat side your rig. Then my sliders will be up for sale as well.

[Rico]

here jeepforum.com/forum/showthread.php?t=270115&highlight=rock+rails+plans

[rckrdyxj]

thats a good setup i can modify to my own likings. thanks. How exactly does it bolt to the unibody? i know it bolts at the pinch weld but where the plated meet the rails does it use nutserts? do you need to drill all the way to the other side with backing plates? please embelish anyone. I really want to make the right, rugged and long lasting and looking good.

[CSaddict]

90096A622 Zinc-Pltd Stl Type F Thread-Cutting Screw, Hex Washer Head UNSLOTTED,3/8"-16 THRD,3/4" Length

This the number from www.mcmaster.com of what I used for the unibody mounts.

[heapxj]

Here is some advise. Put the legs as close to the ends of the rail that goes under the rocker. Add a third leg in the middle. On both sides of Jeep, I hit hard and the slider came up and plowed into the rocker. So now my rockers are as flt as a pancake in front of the rear wheels, which is why I am cutting out the rockers and doing my own thing.

[rckrdyxj]

Thanks I will try to do that. I really like teh slides david built. i will see if i can add an extra leg on each side when it comes time to buy materials and mock them up.