|
|
Post by untainted on May 23, 2007 17:58:36 GMT -5
ok so i plan on eventually plan on going long arm.
i have a 2000 jeep wrangler sport which yes i have the d44 in the rear. hehe
ok here is my dilemma at the moment i do things one at a time currently my check engine light is on for 2nd catalyst main bank so i replaced one of the o2 sensors which i thought it was but its not its the cat .. so i think which exhaust should i go with and my other question which header has the o2 bungs or am i gunna have to give it to a shop to weld em in ?
|
|
|
|
Post by untainted on May 23, 2007 17:59:16 GMT -5
damn i cant type today ... which exhaust should i go with lol
|
|
|
|
Post by untainted on May 25, 2007 17:00:58 GMT -5
ok so my first post made no sense... which exhaust is prefered for a long arm suspension lift on a wrangler?
|
|
loudog3114
 
Member #7
Kneel before me.
Posts: 2,202
|
Post by loudog3114 on May 25, 2007 20:20:12 GMT -5
the two shouldnt really be related, get whichever exhaust you like pretty much. keep the same pipe size maybe?
|
|
|
|
Post by I SMOKE ROCKS on May 28, 2007 10:10:29 GMT -5
BAnKS, i don't see where the o2 sensors would go though, i downloaded the instructions but it doesn't show you were they would go after installing the new headers
|
|
|
|
Post by untainted on May 29, 2007 21:34:19 GMT -5
yea im having trouble finding a detailed thing myself. No company shows if they have o2 sensor bungs in them or not but as for exhaust im looking into buying the fabtech crawler exhaust or similar
|
|
|
|
Post by grundlepunch on May 30, 2007 7:54:07 GMT -5
the two shouldnt really be related, get whichever exhaust you like pretty much. keep the same pipe size maybe? well it actually does matter..... when you get a long arm your going to have to bring your jeep to a shop and have them bend up some pipe for you, or else your upper control arm will hit during flex. so they sell kits in 4 wheel drive hardware that are designed to work with long arms, but they are a bit pricey...... but if your getting an all new system anyways it might be something to look at. |
|
|
|
Post by untainted on May 30, 2007 21:13:10 GMT -5
yes now someone is on the same page as me ... at this point i dont think im going to buy headers but i know im going to need an exhaust to get the flex i want with either a rock krawler 5.5 or similar lift. does anyone here have that lift or have anything negative to say about it? and if you do have that lift which exhaust do you run?
|
|
loudog3114
Member #7
Kneel before me.
Posts: 2,202
|
Post by loudog3114 on May 31, 2007 10:22:43 GMT -5
bah just longarm the front so your coils dont fall out every 3 minutes
|
|
