Pete
 
Member #34
If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you
Posts: 961
|
Post by Pete on Mar 30, 2007 23:43:16 GMT -5
How hard are these to replace, mine stared makin noise the other day, both in 4wd and 2. feels like i have oval wheels when i cut the wheel and turn.  |
|
|
|
Post by HeavyMetal on Mar 30, 2007 23:53:05 GMT -5
not hard at all, they were actually the first ujoint job i ever did and it was straightforward. same way u do any other ujoint job, just get that 36mm socket out  |
|
Pete
Member #34
If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you
Posts: 961
|
Post by Pete on Mar 31, 2007 17:49:53 GMT -5
do i have to pull the axle out of the housing? do the 30's have c clips? or can it be done with the axle still in the housing?
|
|
|
|
Post by Wide-J on Mar 31, 2007 20:39:54 GMT -5
You have to pull the axles out to replace the u-joints. There is a c-clip on the inner shaft of the passanger side, BUT you do not have to take it out since it is a 2 piece shaft. Basically, remove tire, caliper, rotor etc. Remove the three 13mm, 12 point bolts on the back of the unit bearing. Remove unit bearing now. Pull axle shafts out. Replace u-joints. Reinstall in reverse.
|
|
Pete
Member #34
If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you
Posts: 961
|
Post by Pete on Mar 31, 2007 21:22:19 GMT -5
Awesome, thanks steve
|
|
|
|
Post by Wide-J on Apr 1, 2007 12:39:26 GMT -5
If you need help just let me know
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Apr 1, 2007 17:24:15 GMT -5
yj's still had vacuum disco in 1995?
|
|
Rico
Member #31
Posts: 3,926
|
Post by Rico on Apr 1, 2007 17:49:56 GMT -5
YES
|
|
Pete
Member #34
If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you
Posts: 961
|
Post by Pete on Apr 1, 2007 19:19:38 GMT -5
yes they do, although i dont have the vacuum disco anymore
|
|
