|
|
Post by Kobra Kommander on Nov 23, 2006 18:05:20 GMT -5
well
i found out that i have a bad valve cover gasket and i put in a new thermostat...
changed the coolant, it was rusty brown...
it is still over heating
what is my next step?
|
|
Eskimo
Forum User
Member #15
Posts: 1,321
|
Post by Eskimo on Nov 26, 2006 11:36:44 GMT -5
drain the coolant again and the oil check the motor to see if there are any visible, like oil leaks or if anythin like that and if not blow the motor and get a 350 CARBOURATED
|
|
|
|
Post by Buffalo Phil on Nov 26, 2006 13:08:57 GMT -5
Lets see...what did I do to fix my overheating problem.
New engine, backwashed it, and removed the thermostat. Now I think the engine runs too coled, but hey, as long as its not overheating. But I wouldnt reccomend what I did. I would look into flushing your coolant system, get all the rust out of there and see what that does.
|
|
|
|
Post by Kobra Kommander on Nov 26, 2006 17:37:59 GMT -5
well i installed a new radiator and that helped out a bit...
i think the water pump is the next order of business because when i rev the motor the temp will cool down
might also be a sensor...
|
|
