|
|
Post by Queery Adams on Aug 7, 2006 17:28:26 GMT -5
what is everyones plans for thier rigs in the NEAR Future. I dont mean next summer.
the next project coming up on the list.
Right now im lookin for a kp front 60
and a 14 bolt rear.
Im lookin to run 40s on a 10 inch stretch with leafs in the rear and the tank moved up.
comp cutting the rear with a 3 inch flare
and outboarding the shocks.
|
|
Eskimo
Forum User
Member #15
Posts: 1,321
|
Post by Eskimo on Aug 7, 2006 17:48:57 GMT -5
hmmm.... my next project is to go to 35's geared with posssibly 488s and goin long arm. then buying a tank to run it over with...............
|
|
|
|
Post by Buffalo Phil on Aug 7, 2006 18:05:24 GMT -5
By september I'll have 33"s. Over the winter I'll be regearing and locking the rear. Then I'll do the 1" lift on all four corners and other misc shit.
|
|
|
|
Post by trumbulljeeper on Aug 7, 2006 18:16:10 GMT -5
hopefully if the money comes in like it should i will have KP60 front, 10.25 rear, SOA w/ waggy leafs on 40's
|
|
|
|
Post by spanky on Aug 7, 2006 21:20:13 GMT -5
d60 front with 513 (selectable) and chromies- 10.25 rear 513 welded- 105 wb, 42 iroks dovetail the rear hmmm and a dodge diesel
|
|
|
|
Post by HeavyMetal on Aug 7, 2006 21:34:27 GMT -5
in the NEAR Future. I dont mean next summer. |
|
|
|
Post by King Ricer™ on Aug 7, 2006 21:40:01 GMT -5
ummm... im gonna try to get a new track bar bracket on my 30 and if i have the $ to do so im just gonna wheel the shit out of it.
|
|
deanv
 
Member #2
Bad Attitude
Posts: 579
|
Post by deanv on Aug 7, 2006 22:00:57 GMT -5
HPD60 up front with crane king pin knuckle.
Home made steering
going over my motor options and tranny options and t- case options
35 or 40 spline carrier for the nine inch
build a cage, strech, homemade belly up
LOTS of custom fabd' parts bitchesssssiiiiiissssss's
|
|
Eskimo
Forum User
Member #15
Posts: 1,321
|
Post by Eskimo on Aug 8, 2006 16:08:30 GMT -5
o yea i forgot, finding and marrying a sweedish bikini model
|
|
|
|
Post by Queery Adams on Aug 8, 2006 17:31:45 GMT -5
HPD60 up front with crane king pin knuckle. Home made steering going over my motor options and tranny options and t- case options 35 or 40 spline carrier for the nine inch build a cage, strech, homemade belly up LOTS of custom fabd' parts bitchesssssiiiiiissssss's what ever will you do with all that bling. what are you gonna fab out of? wood?? |
|
|
|
Post by austinxj13 on Aug 8, 2006 17:50:13 GMT -5
No-Slip in the back, and then eventually aussie in front. Open diffs suck.
|
|
deanv
Member #2
Bad Attitude
Posts: 579
|
Post by deanv on Aug 8, 2006 18:55:56 GMT -5
HPD60 up front with crane king pin knuckle. Home made steering going over my motor options and tranny options and t- case options 35 or 40 spline carrier for the nine inch build a cage, strech, homemade belly up LOTS of custom fabd' parts bitchesssssiiiiiissssss's what ever will you do with all that bling. what are you gonna fab out of? wood?? no i was gonna make it out of metal...and i wasn't gonna ask justin to do it for me little bitch |
|
|
|
Post by Queery Adams on Aug 8, 2006 20:06:39 GMT -5
hahahaha
good one
so because justins makin me a bumper that makes me a little bitch?
I think not, You have conleys angle iron on your shit. so zip it
and just to make this clear this thread was intended for those who wheel their shit.
and i also said NEAR Future.
Jerk
|
|
|
|
Post by Queery Adams on Aug 8, 2006 20:07:37 GMT -5
No-Slip in the back, and then eventually aussie in front. Open diffs suck. No slip in the back for a d44? I have one im lookin to sell brand new. let me know if you want it |
|
|
|
Post by HeavyMetal on Aug 8, 2006 20:08:33 GMT -5
maybe my new rims and 35x12.5 BFG MTs/Cooper Discoverer STTs if these BFGs on now dont last due to that temporary spool
|
|
