Post by Rico on Jan 28, 2009 7:49:03 GMT -5
Ebrake is wicked easy you can use your stock cables and cut a little bit of the spring on it to make it work... I can help you with this when/if we do it at Pete's shop.
You may be able to get away with your current driveshaft with an adapter flange here www.alljeep.com/oscommerce/product_info.php?products_id=167208
If you dont have an SYE already, you might not need one unless you are lifting it higher
with my swap I reused the leaf spring mounts and made shock mounts...
you can email me or PM me if you need more info
I can't weld but I can certainly help get it ready.
You may be able to get away with your current driveshaft with an adapter flange here www.alljeep.com/oscommerce/product_info.php?products_id=167208
If you dont have an SYE already, you might not need one unless you are lifting it higher
with my swap I reused the leaf spring mounts and made shock mounts...
you can email me or PM me if you need more info
I can't weld but I can certainly help get it ready.
