|
|
Post by Bigbike on Jan 9, 2009 21:30:28 GMT -5
Will a D30 knuckle off a 88 fit a 95 D30? Do the knuckles come off and go on "easy"?
|
|
|
|
Post by HeavyMetal on Jan 9, 2009 21:34:34 GMT -5
normally u gotta hammer that motherfcker off pretty hardcore...i went to town on mine the first time (and before i had the sis hammer)...
im pretty sure the knuckles on an 88 are different as well
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 9, 2009 21:51:07 GMT -5
different brakes/ wheel bearins, not sure if they are compatible
|
|
|
|
Post by Bigbike on Jan 13, 2009 0:00:01 GMT -5
Will knuckles off a 97(Specifically HM) fit a 95? I might buy them from Zach.
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 13, 2009 0:05:35 GMT -5
yes
|
|
|
|
Post by Bigbike on Jan 13, 2009 0:07:15 GMT -5
Ok thanks, sorry for the newb question.
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 13, 2009 0:08:50 GMT -5
EFFIN NOOB GO TO JEEPSUNLIMITED
|
|
|
|
Post by Bigbike on Jan 13, 2009 0:15:15 GMT -5
I was thinking about it. I was planing on burning my  sticker and replacing it with a Jeeps Unlimted and Jeep Forum sticker. Yes two stickers to replace one sticker. |
|
Rico
Member #31
Posts: 3,926
|
Post by Rico on Jan 13, 2009 7:51:24 GMT -5
Knuckles actually come offf reallly reallly easy, just hit it in the right spot... when you look at the knuckle there is a little flat spot right above where the unit bearing bolts up. take one big hammer with a flat head like a mini sledge or something like that and rest it on the flat spot. Then take another hammer and hit the first hammer with it hard. thats what I did and 3 hits on one knuckle and one hit on the other and they came right off. This is BY far the easiest and fastest way to get knuckles off, I took off four knuckles like this and I think the longest it took was 5 hits on HAwk's old D30 Here is a pic.   |
|
