exo'ed project 90XJ SHELL for sale. Feeler..

[havoc319]

Ok a little feeler..
Im looking to sell the SHELL.. maybe a few things with it but mostlythe shell, Of my 90XJ. See the pics and let me know..

Going with JUSt the shell. rear leafs and shakles. About 8" rear springs. Little stiff in the rear. If you want rams and mounts, I can give parts numbers or make up the plates and bushings i did to add the air rams i made. could almost bolt in a setup, get some full width axles and ready to go. The front 3 link mounts are there. Need control arms made and other things. Can give all demensions on the rig.. Flexed it once and came across a shell that i have to build now lol

Everything i did with the truck, pics here.. 95% of it is moving to a new project.. No rot, little surface rust. Not finished. Needs a little TLC but the shell is almost there. Comes with doors also.. Delivery extra. front 3 link frame mounts are there, works great! I can give demensions and all you need is a front 60 and rear whatever and your set.
pass or driver side drop d case can put in.. Needs cross member built.


www.solofabworks.com/1990XJ.htm

I have other things for sale that could help the project out alot more.. Just ask..
700neg for shell alone just shell.

[havoc319]

just given this a bump.. Still looking to move it.. Will go 500 for shell. Other parts negotiable

[havoc319]

anyone at all? lol





Bodys ready to go. Swap parts from your rig to this, get some full width axles, ready to wheel I want to build me new project lol

[havoc319]

Well atleast the votes go the same way i was thinking.. lol

[Rev. AL]

I think you're in too deep friend-o.

[Riot]

Im a sucker for the Mj, what can I say..

[havoc319]

Dec 27, 2008 2:33:02 GMT -5 Rev. AL said:

I think you're in too deep friend-o.

Yeah i know.. So with any luck maybe a little idea of what should be done. I know i could turn the MJ into a little monster. The XJ was sort of a learning curve. works, but needs more help and just asking to get the snot kicked out of it. lol

[havoc319]

wow its leaning twords the XJ here.. On the another forum, leaning on the MJ.. Interesting lol

[havoc319]

well it is basically the same.. Here says, Build XJ.. Other place, build Mj. But the constant is i am out of my skull So how to make the tie brake?? lol

[hippie-metal]

i couldnt get that far into a project just to not finish it. sell it it off and then start another one. finish it up, then sell it if you want....but nothing is better than looking at a finished product and saying....hell yea i built that. just my .02

[havoc319]

Dont get me wrong. I love the rig.. Its my first truck. Ive built it and added to it like a dozen times. I just want to start fresh, build one rig that will really just be able to handel the abuse i am going to put it through but start on a fresh canvas.. I stopped caring about the truck. Ive cut a few corners that need to be addressed, rushed a few things. Figure someone could pick up from where i left off and give it a little TLC and off ya go

[havoc319]

ok its settled.. Im going to continue workong on the XJ.. Not going to backhalf it. Im going to try to get the rear springs to soften up a little. Skid it and wheel it.. Not even going to swap out the 60 for the 14 bolt yet.. Leave the 36's on it for now and have at it.. I need to wheel and the MJ needs a tranny.. Lol

[aluminumcrawler]

YOUR A CHICKEN FAWKER! GET ER DONE BITCH!!!!!

[HeavyMetal]

his a chicken fawker?

[aluminumcrawler]

ha ha ha. Just an ongoing joke between Dan and I!
BA-GAWK, BA-GAWK, BA-GAWK