|
|
Post by ninetysix-ex-jay on Nov 3, 2008 16:49:48 GMT -5
I'm replacing the bushings on a set of RE super flex control arms I just picked up. Do the bushings need to be pressed into place? Any tips with getting the old ones out too?
|
|
XJLI
 
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Nov 3, 2008 17:02:05 GMT -5
which bushings? rubber or the SF joint? im pretty sure the new SF ones are very easy to do, you just need the SF adjustment tool.
|
|
|
|
Post by rckrdyxj on Nov 3, 2008 17:03:06 GMT -5
Super flex joints require the tool to do it or you will void any warranty and damage the joint. Very easy to do.
I do believe the rubber ones need to be pressed in.
|
|
|
|
Post by ninetysix-ex-jay on Nov 3, 2008 17:17:24 GMT -5
Yeah it is the rubber ones sorry I should have specified. The spherical rod end bearing on the other should be pretty bullet proof
|
|
|
|
Post by ninetysix-ex-jay on Nov 3, 2008 18:30:27 GMT -5
Do the bushings need to be greased or anything before I install them?
|
|
