|
|
Post by Saharicon on Oct 6, 2008 15:01:28 GMT -5
Can you Rhino Line wood? Well obviously you can, but do you think it would work well, would the wood act as if it were treated then or do you think water would ruin it?
|
|
|
|
Post by Jeep Creep on Oct 6, 2008 15:04:44 GMT -5
if u rhino lined wood, it would be waterproof wouldnt it? so water wouldnt leak through the liner into the wood?
|
|
XJLI
 
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 6, 2008 15:22:45 GMT -5
i rhino lined my MDF sub box and it stuck pretty well. id assume it would be more waterproof than it used to be
|
|
|
|
|
|
Post by Rev. AL on Oct 6, 2008 17:21:48 GMT -5
I'm pretty sure you can, on the herculiner can it says it can be used on wood amongst other things.  |
|
|
|
Post by Buffalo Phil on Oct 6, 2008 17:33:31 GMT -5
If you can rhinoline Metal, you can rhinoline wood.
Remember metal must be prepped for rhinoline, wood doesn't really need to be as it is pourous enough already to accept any type of paint or adhesive.
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Oct 6, 2008 18:01:40 GMT -5
i can only imagine wut this regards.
|
|
|
|
Post by grundlepunch on Oct 6, 2008 18:07:15 GMT -5
idea..... rhino lining my deck... brb
|
|
|
|
Post by Rev. AL on Oct 6, 2008 18:35:49 GMT -5
idea..... rhino lining my deck... brb oh man! better idea rhino lining my arm bbl |
|
|
|
Post by Saharicon on Oct 6, 2008 18:54:31 GMT -5
ok, but will it keep the wood from rotting you think?
fred, you will have to wait and see my plan :brows:
|
|
|
|
Post by Bigbike on Oct 6, 2008 18:57:58 GMT -5
you will have to wait and see my plan :brows: Are you making wooden bumpers for your Jeep? A wooden Top? |
|
|
|
Post by Saharicon on Oct 6, 2008 21:28:38 GMT -5
no, im making a wooden roll cage
|
|
|
|
Post by Bigbike on Oct 6, 2008 21:40:11 GMT -5
no, im making a wooden roll cage JB says dont make it out of anything other than oak. If not the wood might snap or it will be so dense it will bend your frame. |
|
|
|
Post by HeavyMetal on Oct 6, 2008 21:58:58 GMT -5
i know what hes making.,.,..  |
|
|
|
Post by Bigbike on Oct 6, 2008 22:02:23 GMT -5
i know what hes making.,.,..  |
|
to every one of my posts.
