XJLI
 
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 5, 2008 19:05:28 GMT -5
im putting my new d30 in this weekend but im swapping knuckles since mine are reamed for one ton tres. the ball joints on the geared axle are good, but id rather use my 6 month old ones. if i pressed out then press back in the joints will they be good still?
|
|
|
|
Post by JustTorchIT on Oct 5, 2008 19:07:55 GMT -5
i always told not to, but then again Ive heard of people doing it
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 5, 2008 19:35:16 GMT -5
hmph.
|
|
|
|
Post by Uncle Hawk on Oct 6, 2008 20:39:02 GMT -5
I would not.
|
|
crosbike
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Oct 6, 2008 20:44:57 GMT -5
seeing as its an interference fit i wouldnt. thats just me.
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 9, 2008 22:34:36 GMT -5
so putting old ball joints on this axle back in on my reamed knuckles is a bad idea, as is putting my newer ones in...
oh well, i guess ill wait for spring and do another 4...
|
|
to every one of my posts.