|
|
Post by Bigbike on Sept 28, 2008 21:21:01 GMT -5
Recently my trac bar has been moving around when im turning. Do I need an adjustable one? Could their be something else wrong?
|
|
|
|
Post by JustTorchIT on Sept 28, 2008 21:22:17 GMT -5
if its moving then your hole on the axle could be wobbled out, or ur joint is bad
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Sept 28, 2008 21:23:19 GMT -5
tracbar bushing, upper trackbar joint, loose tb mount, wallowed out tb hole, loose tb bolt.
find where the play is first
|
|
|
|
Post by Bigbike on Sept 28, 2008 21:27:12 GMT -5
The play appears to be at the axle end. Ill try tighting it tomorrow. What should I do if the hole os wallowed out?
|
|
|
|
Post by JustTorchIT on Sept 28, 2008 21:30:42 GMT -5
drill a new whole since you have a stock trackbar and 3 inch lift anyways
and tighten the shit out of it
|
|
|
|
Post by Bigbike on Sept 28, 2008 21:34:10 GMT -5
Drill a new hole in the trac bar or bracket? how far over should I drill the hole?
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Sept 28, 2008 21:35:34 GMT -5
enough to where you arent overlapping the current hole and have a little meat inbetween the two
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Sept 28, 2008 21:36:15 GMT -5
drill the hole more towards the drivers side to help center your axle
|
|
|
|
Post by Bigbike on Sept 28, 2008 21:37:10 GMT -5
Ok sounds good.  In the bracket Im presuming. |
|
