Parting out long armed, 1 ton YJ

[Wide-J]

Parting out a 1 Ton coiled YJ. Jeep is still running, driving and complete.

High pinion, kingpin Ford Dana 60 from a 79 F350. Will bolt right in to any XJ, TJ or ZJ. Has Clayton high clearance axle brackets that were installed by Clayton. Axle has less than 800 miles on brand new: 4.56 Yukon gears with extended lifetime warranty, Yukon master install kit, Detroit Soft Locker, Warn Premium hubs, Blackbird Customs disc brake brackets, Chevy ¾ ton rotors, calipers, pads, wheel bearings and seals. Banditt Off-Road did the 1 ton steering (1.5” DOM with .25” walls). Wms to wms is 69”. $2000

Rear axle is a 14 bolt with a Detroit Locker and factory 4.56 gears. It also has Clayton high clearance axle brackets and truss that were installed by Clayton. Also has 1350 yoke with u-bolts, Ruff Stuff Specialties disc brake brackets, Chevy ¾ ton rotors, and hubs. Wms to wms is 67”. $650

AMC 360 that runs perfect! Has an HEI distributor, Taylor 8mm wires. Complete from intake to oil pan. $500

YJ frame with complete Clayton long arm coil conversion. Frame was modified and suspension was built by Clayton Off-Road. Includes long arms with Johnny Joints, springs and shocks. Just bolt in your axles or just use the long arms for a TJ. Price is $1800

Ford T18 and NP205 still bolted together. 6.32 1st gear, twin sticked 205. Rock solid. 2 years ago I put in a new clutch fork & slave cylinder (along with a clutch). Comes complete with clutch slave, braided hydraulic line, and clutch master cylinder. $600


RCI 15 gallon aluminum fuel cell with sending unit (never hooked up the sending unit but it should work). Comes with Autometer Ultra-Lite fuel gauge and AN fittings $150

YJ doors in red complete with glass $150

YJ hard top in black with factory black tinted windows. No cracks. $300

Bestop Sun Rider soft top in black. Complete, ready to bolt in. Clear windows in good condition, no rips in top, zippers work mint as well. Will come with everything to bolt in. Fold it all the way back or just flip the top over the driver and passenger back for some sun $250

YJ windshield frame in red. Rust free and comes with the wiper motor $100. Bad glass

Windshield hinges in green, rust free, move freely $30

Radiator for AMC or Ford V8’s in a YJ. $75

Currie Anti-Rock for YJ/TJ $200

Poison Spyder Rocker Knockers with slider bar. Comes with mounting hardware. Needs paint. $150

Poison Spyder Trail Corners for YJ. Factory tail lights. $100

Will sell rust free 1995 YJ tub with PSC sliders and PSC trail corners for $600. Needs paint.

Tom Woods 1350 double CV rear shaft - $150

Power steering box - $30

Rear seat belts from a 95 tub - $25

YJ hood (needs paint) - $25



The entire Jeep is still together and runs and drives great. Will sell as complete vehicle also. Let me know if you are interested in anything. Located in Southington, CT
Steve [e-mail]

[KtmRacer419]

[Speed]

If for some unknown reason, you sell the frame and the person buying doesnt want the long arms. can i buy them? mine are shot.

also. dont you have a 1-ton brake booster. im also in need of one of those.

and do you think the rockers would fit my TJ?

[Rico]

Damn dude that f'n sucks but I hope you will build another 4x4

[CumminsJeep]

gonna be sad to see it go man ...how much for the whole thing? i cant afford it just wondering what you would ask for it

[grundlepunch]

x2 how much for the whole thing?

[Jeep Creep]

the parts added up are nearly 8k

[Pete]

to an awesome Jeep it will be missed. Steve, the trail corners, did you weld anything on them for your rear stinger? and is there a large opening for the tail lights? i put LED tail lights in mine and wonder if the LED's will cover the hole.

[1tonflattie]

how long is your rear shaft?

[Pedro]

farewell thee Wide-J

[Wide-J]

Hey guys. I have someone that is very interested in buying the YJ complete (minus harnesses, seats, Iroks) so I'm not selling anything until I hear back from him. I will keep you guys posted though. Thanks.

[Buffalo Phil]

It will be strange to see the Wide J with a new owner.

[XJLI]

Sept 24, 2008 7:58:30 GMT -5 Buffalo Phil said:

It will be strange to see the Wide J with a new owner.

x2

but id rather see a nice rig passed on to a good owner than have it parted and bereft of life.

[Buffalo Phil]

Sept 24, 2008 8:15:10 GMT -5 XJLI said:

Sept 24, 2008 7:58:30 GMT -5 Buffalo Phil said:

It will be strange to see the Wide J with a new owner.

x2

but id rather see a nice rig passed on to a good owner than have it parted and bereft of life.

But when we see it, we shall the rig and not the owner, for he didn't built it.

[XJLI]

x2