|
|
Post by xjthextremejeep on Sept 21, 2008 23:58:26 GMT -5
i have a high pinion 44 going under my jeep with the radius arms..... i am wondering what i need to do to the radius arms to get it to work and what i need to get/build for a draglink because i already have a tierod
|
|
Mike
 
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Sept 22, 2008 3:54:34 GMT -5
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Sept 22, 2008 13:16:56 GMT -5
 don't use the garbage ford radius arms
|
|
|
|
Post by grundlepunch on Sept 22, 2008 14:32:46 GMT -5
you can buy a kit, suck as the clayton kit (not being brand bias, just the one i know) that will have a crossmember to mount the arms and then you can buy their axle bracket kit that will have coil buckets, shock mounts, track bar mounts, ect.
if you are not narrowing the axle just use the stock steering, you will need to ream out your pitman arm to use the draglink
kind of a vague question, once you get into the specifics im sure we could help you more.
|
|
|
|
Post by xjthextremejeep on Sept 22, 2008 16:16:57 GMT -5
ok basically im not using hte stock ford radius arms. im gonna grind em down so i have something to weld to.... i was wondering if there was a company that sold kits that work with this axle similiar to the tnt truss but i havent found any... im just wondering really what i should do about the radius arms being there in the way.... im already just building a 1 ton draglink and it is staying stock width
|
|
