|
|
Post by 88XJchief on Aug 19, 2008 20:21:39 GMT -5
TBI or multi port. Needs to be a chevy motor. Dont care if its a 5.0 or 5.7. Can be from a truck and I need the computer and wiring harness for it. It needs to be cheap.
Thanks
|
|
|
|
Post by 1tonflattie on Aug 19, 2008 21:46:45 GMT -5
i can build you a tbi harness that can be wired into virtually anything. Let me know, if you find an engine without a harness
|
|
|
|
Post by 88XJchief on Aug 20, 2008 5:29:46 GMT -5
Ok thanks. I will get back to you on that.
|
|
|
|
Post by Dr. Thunder on Aug 20, 2008 5:32:14 GMT -5
You passed up my LT1!
|
|
|
|
Post by 88XJchief on Aug 20, 2008 5:35:24 GMT -5
I didnt have money at the time for your LT1. It would have been a nice improvement in power for my firebird.
|
|
|
|
Post by grundlepunch on Aug 20, 2008 10:13:20 GMT -5
if my 4.0l ever shits the bed im going 5.3L out of a truck
humm. that was random. sorry. ill keep an eye out for chebys
|
|
Pete
 
Member #34
If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you
Posts: 961
|
Post by Pete on Aug 20, 2008 13:21:54 GMT -5
we have a tune port set up that Im not sure if we are going to be using. has everything, all wiring, sensors. I'll check and see and let you know.
|
|
|
|
Post by Wide-J on Aug 23, 2008 17:17:12 GMT -5
Here is my dads small block 350 he is selling. It is still in the Chevelle and is a complete running and driving motor. It has the much desired double hump/camel hump heads, a brand new Edelbrock 650 carb, wires, plugs, cap, rotor, etc. The motor runs really good, looks good and is complete from carb to oil pan with alternator, ps pump, fan, starter, etc (no a/c brackets or pump). Come hear it run if you are interested! Asking $650 for it. (Even though the air cleaner says its a 396, its a 350). Steve (860) 621-3765    Double hump head identification  Block casting number  |
|
