Mike
 
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Dec 6, 2008 13:42:21 GMT -5
cool deal.
|
|
|
|
Post by HeavyMetal on Dec 15, 2008 0:39:10 GMT -5
After a lot of work, and a lot of learning experiences, the WJ crossover conversion is "done". I have to still replace my tie rod linkage with some new rod because this rod is too short due to the long TRE they use on inverted-T to accept the draglink...but..good to go for now, all functions fine. TNT trackbar we cut the bend out of, beveled and rewelded together, then sleeved with some wider diameter DOM at the join. all in all, the steering performs a lot better...i dont know about the brakes yet because of course we blew a rear wheel cylinder in the process and didnt have the time to replace it on a sunday night...but will be replacing that asap..   ...oh and the LCA mount is fixed.. |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 15, 2008 0:43:50 GMT -5
ktmracercustoms trackbar (NOT TNT)
ktmracer customs wj knuckles with spacers welded to them (NOT WJ)
ktmracercustoms dana30 (NOT JEEP)
|
|
|
|
Post by HeavyMetal on Dec 15, 2008 0:44:28 GMT -5
CRUZIN?!?!?!
|
|
|
|
Post by CumminsJeep on Dec 15, 2008 0:48:52 GMT -5
|
|
|
|
Post by Buffalo Phil on Dec 15, 2008 1:02:08 GMT -5
ktmracercustoms trackbar (NOT TNT) ktmracer customs wj knuckles with spacers welded to them (NOT WJ) ktmracercustoms dana30 (NOT JEEP) lol, don't forget the Gunsmithing LTD CUSTOM ROTORS.  |
|
|
|
Post by CumminsJeep on Dec 15, 2008 1:06:05 GMT -5
uh oh what did you do to the rotors?
|
|
|
|
Post by Bigbike on Dec 15, 2008 1:07:02 GMT -5
looking good.  |
|
|
|
Post by Buffalo Phil on Dec 15, 2008 1:07:56 GMT -5
uh oh what did you do to the rotors? Made em fucking work. |
|
|
|
Post by CumminsJeep on Dec 15, 2008 1:17:56 GMT -5
uh oh what did you do to the rotors? Made em fucking work. go on..... |
|
|
|
Post by Burton58 on Dec 15, 2008 1:23:53 GMT -5
WJ rotors are 5x5. XJ is 5x4.5 you do the math twas a good day all in all. i needs me some WJ knuckles |
|
|
|
Post by HeavyMetal on Dec 15, 2008 1:23:54 GMT -5
we just had to redrill the bolt pattern and bore the center hole a tiny bit
RotorSmith
|
|
|
|
Post by CumminsJeep on Dec 15, 2008 1:24:42 GMT -5
gotcha |
|
|
|
Post by Buffalo Phil on Dec 15, 2008 1:35:41 GMT -5
|
|
Pedro
Watch out for that.... tree
Posts: 4,115
|
Post by Pedro on Dec 15, 2008 2:13:19 GMT -5
 purdy
|
|
