|
|
Post by grandzjtsi on Jan 20, 2008 19:44:17 GMT -5
i think im getting a comanchee now forget the wrangler LOOKS  |
|
|
|
Post by Emuhlea on Jan 20, 2008 21:27:45 GMT -5
where is the picture of the dif
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 21:40:24 GMT -5
figured it wasn't necessary but hold on.
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 21:43:33 GMT -5
everything is tucked up real nice and high clearence. very glad to get rid of the shackles, no more big band after leaving a rock!  |
|
Mike
 
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Jan 20, 2008 21:58:26 GMT -5
im so jealous
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 22:06:53 GMT -5
i'm so glad you showed me this thing! i would have never dreamed it to be where it is now. when i bought it i planned to DD it but when i bought it was around when i became a more active member and when i started learning more. i owe the realness of this build to  |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 20, 2008 22:56:59 GMT -5
i showed my dad pics of it.
and he is pissed he ever let it go
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 23:12:36 GMT -5
never did meet the previous owner
|
|
|
|
Post by JustTorchIT on Jan 20, 2008 23:27:53 GMT -5
WOW!!!!..... That thing looks amazing now..... AWESOME JOB
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 20, 2008 23:28:51 GMT -5
that 44 is out of a scout correct?
does it have inner and outer axle seals? and use packed wheel bearings?
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 23:33:05 GMT -5
no inners that i know of  but the outers are there and yes the bearings are packed in grease, there is a steel donut type thing at the end of the axle that keeps fluid from getting to the bearing. i didn't know much about it so i just greased em up |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 20, 2008 23:39:05 GMT -5
does it have the adjustable bearings? or do they just slide in there and bottom out?
|
|
|
|
Post by Dr. Thunder on Jan 20, 2008 23:43:38 GMT -5
no adjustable bearings. should there be an inner axle seal? i guess there could have been but i didn't notice them
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 20, 2008 23:57:19 GMT -5
i know my dana60 uses the same outers as scout 44's from like 1960-1975
it has an inner and outer seal and packed wheel bearings. the outer seal is part of the retainer plate.
|
|
|
|
Post by Dr. Thunder on Jan 21, 2008 0:06:39 GMT -5
i know my dana60 uses the same outers as scout 44's from like 1960-1975 it has an inner and outer seal and packed wheel bearings. the outer seal is part of the retainer plate. i liked the packed outer bearings, less chance for leaky outter seal. i didn't do the outer seals cause the guy from scout connection told me that you pretty much had to cut the old bearing and collar off the axle to change the seal. i will look for inners next time i have the axle apart cause now i'm curious. no seals came with my install kit like for the dana 30 |
|
