KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Mar 1, 2007 0:29:54 GMT -5
confirmation
timken part number for 1990 and earlier is 513107
timken part number for my 91 is 513084
|
|
|
Post by HeavyMetal on Mar 1, 2007 0:30:18 GMT -5
im actually not sure, you could be right i know what i posted is in fact correct from experience, but vacuum disco years i really have no experience with, its worth looking into for sure now that i hear that edit: ok you beat me to it by 1 min haha
|
|
Rico
Member #31
Posts: 3,926
|
Post by Rico on Mar 1, 2007 9:40:36 GMT -5
any chance I can get one of these bearings Ben ? Installer do u need 3?
|
|
TheInstaller
Member #18
Lead, Follow, Or Get Out Of The Way!
Posts: 812
|
Post by TheInstaller on Mar 1, 2007 12:28:07 GMT -5
I really only need one.
|
|
heapxj
Member #27
You Can Feel Good About Hood.
Posts: 1,082
|
Post by heapxj on Mar 1, 2007 13:43:48 GMT -5
then there is three styles Will. These came off low output Jeeps. If you don't have bolt heads holding on the calipers, then these unit bearings will not work for you unless you change the knucles too. I believe the older Jeeps used allen wrench bolts to hold on the caliper.
|
|