CSaddict
 
PayPal hater
I love Newbs.
Posts: 3,889
|
Post by CSaddict on May 22, 2007 16:13:26 GMT -5
A good thin cutting wheel wil go through it like butter. Don't cut into the steering shaft though.
P.S. if you use a torch, dont heat the shaft, just the arm. You will ruin the seal most likely anyway though.
|
|
heapxj
Member #27
You Can Feel Good About Hood.
Posts: 1,082
|
Post by heapxj on May 22, 2007 21:11:09 GMT -5
James, Your gonna have to use an oxy acetaline torch and burn that bolt out. I know exactly what a bitch it is to take those UCA's out. You have one of those? I can drive it up there with the one upper if you do. If not I may take 93xj up on that griswold trip. Gonna try my angle grinder on the pitman arm this evening, I figured the metal was too hard to try and cut but ill give it a shot I do |
|
loudog3114
Member #7
Kneel before me.
Posts: 2,202
|
Post by loudog3114 on May 22, 2007 22:01:17 GMT -5
today was a massacre of jeep parts... pics to come
|
|
