KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 28, 2008 22:20:14 GMT -5
Brand new, in open box. It's a psc 1.5" x 6.75" cylinder with all bolts, heims and tabs and 3, 36" hoses. you will need the nessesary elbow connectors for the hoses. other than that, drill and tap your factory steering box and install the ram. 6.75" is perfect for my dana44, and I have heard its perfect for dana30's, you can shorten the throw as well if needed. www.pscmotorsports.com/sc2221k-15-x-675-cylinder-assist-steering-cylinder-kit-p-750.htmlThe hoses I got from supply co somethin or other dot com and they were around 7 bucks each. save on shipping and get free hoses $165 for everything or trade for.... comanche stuff ( in my wanted thread) jhonny joints
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Dec 28, 2008 22:49:49 GMT -5
how hard would it be to rig something like this up in my dana 44?
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 28, 2008 22:55:33 GMT -5
if you can weld 4 tabs, drill and tap a steering box and use basic handtools you are allset
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 28, 2008 22:56:49 GMT -5
sale pending
|
|
Mike
No, I don't tip, why?
Posts: 3,928
|
Post by Mike on Dec 28, 2008 23:17:12 GMT -5
let me know if it falls through
|
|
|
Post by jeepbonehead on Jan 3, 2009 0:07:18 GMT -5
would it work for a d60, if it would i'll buy it
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Jan 3, 2009 0:10:53 GMT -5
would it work for a d60, if it would i'll buy it if you want the turning radius of a school bus
|
|