Post by crosbike on Nov 10, 2008 19:17:01 GMT -5
I figured I would start one of these new fangled build threads seeing as that is what I am doing. Anyways I am swapping everything from my old 94 grey rustbucket 4dr jeep to my new 93 green mintmachine.
What is being swapped
TNT long arms
RE 5.5" front coils
RE HD track bar/bracket and brace
MORE steering brace
TNT inner steering brace
Nates4x4 winch bumper(steering box outer brace)
JCR 1 ton steering
Dana 30 w/4.56, rockcrusher diff cover and new hubs, ball joints and brakes
RE 3.5" leaf springs
TNT 1.5" boomerang shackle
Dana 44 w/4.56 gears, aussie locker, hi-clearance shock mounts and warn diff guard
AJs offroad armor super square sliders (2x6x1/4 rectangle stock to be welded in place of rockers this winter)
AEV oil pan skid(nth degree)
OKfab gas tank skid
CSaddict fab rear bumper/tire carrier
Slickrockgear quarter panel armor(has to be extended for use on 2 dr)
Surco roof rack
I am planning on building a new rear storage bin and removing my rear seats for good so i can put an air mattress in the back when camping.
I need to rework my front bumper for a better approach angle.
Stiffeners are 90% welded in just need more wire for welder. Cousin is helping me in that department.
Old greys NP231 is also migrating to my 2dr with SYE installed.
Lighting will be different than you have seen so stay tuned. Plan on doing everything right this time. My grey jeep was the experiment and this one hopefully will last and perform very well for a while.
here is the new jeep
What is being swapped
TNT long arms
RE 5.5" front coils
RE HD track bar/bracket and brace
MORE steering brace
TNT inner steering brace
Nates4x4 winch bumper(steering box outer brace)
JCR 1 ton steering
Dana 30 w/4.56, rockcrusher diff cover and new hubs, ball joints and brakes
RE 3.5" leaf springs
TNT 1.5" boomerang shackle
Dana 44 w/4.56 gears, aussie locker, hi-clearance shock mounts and warn diff guard
AJs offroad armor super square sliders (2x6x1/4 rectangle stock to be welded in place of rockers this winter)
AEV oil pan skid(nth degree)
OKfab gas tank skid
CSaddict fab rear bumper/tire carrier
Slickrockgear quarter panel armor(has to be extended for use on 2 dr)
Surco roof rack
I am planning on building a new rear storage bin and removing my rear seats for good so i can put an air mattress in the back when camping.
I need to rework my front bumper for a better approach angle.
Stiffeners are 90% welded in just need more wire for welder. Cousin is helping me in that department.
Old greys NP231 is also migrating to my 2dr with SYE installed.
Lighting will be different than you have seen so stay tuned. Plan on doing everything right this time. My grey jeep was the experiment and this one hopefully will last and perform very well for a while.
here is the new jeep