crosbike
 
Swap Shop Cop
choo choo
Posts: 6,389
|
Post by crosbike on Nov 10, 2008 17:30:49 GMT -5
Ya. MA is ghey like that too. Hence my grey jeep inspection is 8 months overdue. I took it to one guy and he laughed and said sick jeep, no way this could pass...and handed me a good sticker. Im getting my green jeep inspected pre lift so i dont have to worry about it for a year. Maybe i will die in that time and it wont concern me.
|
|
|
|
Post by Rev. AL on Nov 10, 2008 18:00:40 GMT -5
Ya. MA is ghey like that too. Hence my grey jeep inspection is 8 months overdue. I took it to one guy and he laughed and said sick jeep, now way this could pass...and handed me a good sticker. Im getting my green jeep inspected pre lift so i dont have to worry about it for a year. Maybe i will die in that time and it wont concern me. thats the spirit! lo9l |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Nov 25, 2008 23:06:39 GMT -5
so i have a brilliant idea for the cel issue
right above it is this "gen" light, no idea what it means, but it comes on for a wee bit then turns off.
remove cel bulb, and move gen bulb to the cel slot
WINWIN
|
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 29, 2008 13:51:31 GMT -5
so i ficksed the cel issue.
and my inspection runs out in 2 days
anyone got some 15" pizza cuts i can borrow/buy?
|
|
|
|
Post by HeavyMetal on Dec 29, 2008 13:53:03 GMT -5
got u covered i think
|
|
|
|
Post by ep191 on Dec 29, 2008 17:18:58 GMT -5
so i have a brilliant idea for the cel issue right above it is this "gen" light, no idea what it means, but it comes on for a wee bit then turns off. remove cel bulb, and move gen bulb to the cel slot WINWIN thats so full of win its overflowing |
|
KtmRacer419
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Dec 30, 2008 22:31:18 GMT -5
so i have a brilliant idea for the cel issue right above it is this "gen" light, no idea what it means, but it comes on for a wee bit then turns off. remove cel bulb, and move gen bulb to the cel slot WINWIN thats so full of win its overflowing not really. the bulbs are plugged in directly to a c ircuit board. i found my way around it though |
|
to every one of my posts.
