|
|
Post by j33p0104 on Oct 18, 2008 9:28:50 GMT -5
my 4.0l is a piece it has no power and it burns alot of oil. so i want to get a 350. i probably wont run a/c because i never use it but if i can get an engine with a/c i might as well use it. i just want the simplest set up. will 350's bolt up to 93 zj engine mounts or would i have to get new ones and put them in?
|
|
KtmRacer419
 
Unibody Connoisseur
straight outta 05
Posts: 7,424
|
Post by KtmRacer419 on Oct 18, 2008 9:55:21 GMT -5
|
|
|
|
Post by j33p0104 on Oct 18, 2008 10:12:30 GMT -5
|
|
XJLI
The Nina, The Pinta, The Santa Maria.
Posts: 6,923
|
Post by XJLI on Oct 18, 2008 11:20:08 GMT -5
404 not found.
cheap 350s suck, and you wont get power til 4 grand, and it wont be as much torque as the 4.0
|
|
|
|
Post by hippie-metal on Oct 18, 2008 12:51:28 GMT -5
over the winter i am pulling my 360 and throwing in a 401 in the waggy  you could take that |
|
|
|
Post by Wide-J on Oct 18, 2008 15:04:39 GMT -5
I love my AMC 360! The aftermarket support is very expensive compared to a small block but I am a huge fan. Even with my factory 2 barrel carb I have plenty of power when on the trail or on the road.
Some drawbacks about a potential engine swap in a ZJ are that a 350 and and AMC 360 wont mate to your transmission. Im not sure if there is an adapter but you could check Novakadapt.com or Advance Adapters. Would you need motor mounts? Yes. There is plenty more things to consider other than motor mounts. Wiring, cooling, fuel system just to name a few. I would guess it would be cheaper to swap in a another 4.0 with some performance or swap in an ZJ 360. Don't get confused, an AMC 360 is COMPLETELY different than a Chrysler 360 that they put in a ZJ.
|
|
|
|
Post by j33p0104 on Oct 19, 2008 9:35:16 GMT -5
which model 360 do you have? or which year. would you know anywhere to find them probably out of a wagoneer or something right?
|
|
|
|
Post by j33p0104 on Oct 19, 2008 9:37:07 GMT -5
over the winter i am pulling my 360 and throwing in a 401 in the waggy you could take that is the 360 in good condition and how much would you sell it for? |
|
|
|
Post by Wide-J on Oct 19, 2008 15:42:28 GMT -5
The 360 or 401 we are talking about are 70's-early 1990ish AMC motors. If you want to go V8 route, you could do a 360 from a 1990's+ Grand Cherokee or Dodge Ram.
|
|
|
|
Post by Dr. Thunder on Oct 19, 2008 16:01:58 GMT -5
cheap 350s suck, and you wont get power til 4 grand, and it wont be as much torque as the 4.0  That made me lol. 4 grand  not as much torque down low Sorry dude but lawl |
|
